*********************************************************************
*                                                                   *
*        Configuration File for the 1 & 3 Channel DSS-Cubes         *
*                                                                   *
*                          Software V1.0                            *
*********************************************************************
* Syntax:                                                           *
*  - Lines beginning with a star '*' are comments (and are ignored) *
*  - Empty lines are not allowed                                    *
*  - Parameter keywords are of six capitalized characters,          *
*    directly followed by an equal sign                             *
*  - The parameter value starts at column #8                        *
*  - Line length is limited to 70 characters                        *
*********************************************************************
****** !!! Parameters for 3 channel Cubes only !!!             ******
*********************************************************************
*
** Active Channels      1 = ch1  // 2 = ch1 & ch2  // 3 = ch1 to ch3
CH_NUM=3
*
** Amplifier Gain       1, 2, 4, 8, 16, 32 or 64
P_AMPL=32
*
** AD Converter Mode    0 = Low power // 1 = High resolution
C_MODE=0
*
** Amplifier Chopping   0 = off // 1 = on
A_CHOP=1
*
*********************************************************************
*****   General parameters for 1 and 3 channel Cubes            *****
*********************************************************************
*
** Project Name         Project name of max. 20 characters
E_NAME=BRZ22
*
** Sample Rate          50, 100, 200, 400, (800@1ch) sps
S_RATE=200
*
** Digital High Pass    0 = off // 1 = on
A_FILT=0
*
** FIR Filter           0 = Linear phase // 1 = Minimum phase
A_PHAS=0
*
** TimeBase Correction  0 = off // 1 = PLL // 2 = DIFF
PLL_XO=0
*
** Geographic position lat, lon, alt; to speed up satellite search
*GPS_PO=>SIP+47+010+1000
*
** GPS Mode             0 = cycled // 1 = continuously
GPS_ON=0
*
** GPS & Flush Interval 3 to 60 minutes
*  (GPS interval only in cycled mode)  
F_TIME=50
*
*********************************************************************
*****   Parameters relevant for GPS cycled mode only            *****
*********************************************************************
** GPS OFF after        0 = 'GPS_TI' // 1 = 60 GPS fixes max.'GPS_TI'
GPS_OF=0
*
** GPS ON Time          3 to 60 minutes
GPS_TI=5
*